How to Flash Stock Rom using Smart Phone Flash Tool

This is the instruction to Flashing any Stock Rom and Custom Rom using Smart Phone Flash Tool (Sp flash tool) on Windows or MC computer.

Requirements: Your Smartphone should have at least 30-40 percent charge of battery and UBS Data Cable to perform the flashing process.

Flash Stock Rom using Smart Phone Flash Tool (SP Flash Tool)

Step 1: Download Android USB Driver and install on your computer. In case USB Driver is already installed on your Computer then skip Android USB Driver installation.

Step 2: Power Off your Smartphone and remove the battery if it is removable.

Step 3: Download the Phone Model Stock Rom or Custom Rom that you want to Flash on your Smartphone and extract Download WinZip or WinRar File on your Computer.


Step 4: Download and Extract Flash Tool on Your Computer. After then you will be able to see the following files:

Step 5: Now Open Flash_tool.exe files in Step#4.

Step 6: Once Flash Tool is launched, click on the Download Tab.

Step 7: In the Download Tab, now click on the scatter-loading button.

Step 8: Now, Locate the Scatter File (you will find the scatter file in the Stock Rom folder).

Step 9: Go to click on the Download Button to begin the Flashing Process.

Step 10: Now, Connect your Smartphone to the PC using USB Cable without battery if it is removable. After connecting the device to the PC then Press Volume Down or Volume Up key, so your pc easily detect your Smartphone.


Step 11: Flashing is completed, disconnect your Smart phone from the Computer.

 

Now your Smartphone is successfully running the Stock Rom you have Downloaded.

Keep in mind:

[*]The above tutorial only works with the Stock firmware or Custom Rom which comes with the Scatter file in it (basically mediatek devices).

[*] Backup Please: Take a backup of your important data before using the Smart Phone Flash Tool as because during the flashing process your personal data will be removed permanently.